1 x HIP In-Line Pressure Filter Cartridge Housing
3/8" Pushfit, Bracket & Screws. With or without 1st cartridge.
No Hosing or Tap. Ideal for changing to Doulton Filters

HIP Made from food grade acetal and polyester, the HIP is a cost-effective and easy to use filter unit. It can be used either to filter all cold water running into the kitchen sink, or to provide filtered drinking water via a separate faucet.

The HIP can be supplied with 1st filter candle. As standard the HIP takes filter candles which are 10 inches long, 2 inches in diameter, with a short mount.

There is a DIY kit available with the HIP filter to enable easy fitting via a line piercing valve to 15mm copper pipes without the services of a plumber. The HIP DIY kit also provides all the fittings needed to install a separate drinking water faucet. For any other sizes of pipe or non copper pipes, a plumber or specialised installer should be consulted.

Both inlet and outlet are 3/8 inch push fit connections suitable for 3/8 flexible plastic pipe. When fitted with Sterasyl™ filter candles, the HIP will produce a flow rate of approximately 300 litres per hour at 3 bar pressure.

The HIP can be fitted with Sterasyl™, Carbosyl™, Supercarb™, or Ultracarb™ filter candles. The installation instructions provided with the product should always be followed carefully.